TEMPD
Bulk Data Entry Defines a temperature value for all grid points of the structural model that have not been given a temperature on a TEMP entry.
Format
| (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) |
|---|---|---|---|---|---|---|---|---|---|
| TEMPD | SID | T | SID | T | SID | T | SID | T |
Example
| (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) |
|---|---|---|---|---|---|---|---|---|---|
| TEMPD | 1 | 216.3 |
Definitions
| Field | Contents | SI Unit Example |
|---|---|---|
| SID | LOAD
set identification. (Integer > 0) |
|
| T | Default temperature value.
From one to four default temperatures may be defined on a single
entry. (Real) |
Comments
- Temperature sets may be selected for use in a subcase by the TEMPERATURE(LOAD) or TEMPERATURE(BOTH) Subcase Information Entry. They can also be selected by the EXCITEID field of a TLOAD# entry or selected on the IC Subcase Information Entry. They can also be combined with other TEMP, TEMPD or TEMPSEC Bulk Data Entries on a TEMPADD Bulk Data Entry. For more information, refer to the TEMPERATURE Subcase Information Entry.
- This card is represented as a temperature load in HyperMesh.