EDRAWB
Bulk Data Entry Defines location and restraining force per unit length for a draw bead in a one-step stamping simulation.
Format
| (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) |
|---|---|---|---|---|---|---|---|---|---|
| EDRAWB | EID | S1 | T2 | S2 | T2 | DFORCE | DSID |
Example
| (1) | (2) | (3) | (4) | (5) | (6) | (7) | (8) | (9) | (10) |
|---|---|---|---|---|---|---|---|---|---|
| EDRAWB | 13 | -1.0 | 1.0 | 1.0 | -1.0 | 100.0 | 2 |
Definitions
| Field | Contents | SI Unit Example |
|---|---|---|
| EID | Element identification number. No default (Integer > 0) |
|
| S1, T1 | Parametric entry points for the line. No default (Real; | S1, T1 | ≤ 1.0) |
|
| S2, T2 | Parametric exit points for the line. No default (Real; | S2, T2 | ≤ 1.0) |
|
| DFORCE | Draw
bead restraining force per unit length. No default (Real) |
|
| DSID | Draw
bead set identifier for retrieving the input file
back to HyperForm. Not
used by the solver. No default (Integer > 0) |
Comments
- This entry is only valid with an @ HyperForm statement in the first line of the input file.