connectors
Unless otherwise specified, data names are accessible in level 3 only.
- attributesmax
- The number of attributes owned by this entity.
- ce_acm_option_1
- Thickness type of area connector.
- ce_appliedmass
- The applied mass value.
- ce_appliedmassdis
- The applied mass options value.
- ce_area_maint_gaps
- The gap value between hexa faces and shells.
- ce_areaconstthickness
- Constant thickness of area.
- ce_areastacksize
- The number of hexa coatings for area connectors.
- ce_bodylen
- The bolt body length value.
- ce_boltmaxdiameter
- The maximum diameter for bolt hole recognition.
- ce_boltmindiameter
- The minimum diameter for bolt hole recognition.
- ce_boltthread
- The bolt thread length metadata value.
- ce_configname
- FE type name for a realized connector as defined in the feconfig.cfg file.
- ce_connectivity
- The connectivity between realization and links is mesh dependent or independent.
- ce_connectivity_adjust
- The flag that indicates the connectivity adjust option.
- ce_connectivity_adjust_realization
- The CE_FE_DIRC_FIND_NODE flag value.
- ce_coords
- The x, y, z coordinates of the connector.
- ce_density
- The density value for a line connector.
- ce_dia_factor
- The cylinder bolt diameter factor value.
- ce_diameter
- The diameter value.
- ce_dir_assign
- The value for the CE_FE_DIR_PROP_ASSIGN flag.
- ce_dircords
- The x, y, z coordinates of the direction node.
- ce_endoffset_option
- The half-spacing offset flag for seams or lines.
- ce_facearea
- The area of the surface connector.
- ce_fe_vector
- The flag that indicates if a vector is created during realization.
- ce_fesolver
- The FE solver name.
- ce_ijk
- The vector definition used for realization.
- ce_l1
- The cylinder bolt length for the L1 direction.
- ce_l1d1
- The metadata stored for cylinder bolt diameter for L1 direction.
- ce_l2
- The cylinder bolt length for the L2 direction.
- ce_l2d2
- The metadata stored for cylinder bolt diameter for L2 direction.
- ce_layers
- The number of thickness layers (2T/3T) for the connector.
- ce_linelength
- The length of the line connector.
- ce_link_number
- The number of link entities for the connector.
- ce_ltb_angled_direction
- The flag that indicates whether direction reversal is allowed during realization.
- ce_nonnormal
- The value that indicates whether non-normal projection is allowed during realization.
- ce_propertyid
- The property ID value.
- ce_rbe3_center_option
- The flag that indicates the chosen center.
- ce_realents
- The realized FE entities of a connector.
- ce_spacing
- The pitch value for a line connector.
- ce_state
- The state of the connector entity.
- ce_style
- The connector entity type during its creation.
- ce_systems
- The systems creation requirement.
- ce_tolerance
- Retrieving data. Wait a few seconds and try to cut or copy again.
- ce_usercontrol
- The user control flag.
- definedentity
- True if the entity is defined, false otherwise.
- id
- The ID of the entity.
- include
- The ID of the include file the entity is organized in.
- includeid
- The ID of the include file the entity is organized in.
- internalid
- The ID of the entity.
- internalname
- The internal name of the entity.
- moduleid
- The module ID of the entity.
- poolid
- The pool number of the entity.
- poolname
- The pool name of the entity.
- realization_bottom_haz_elems
- Imprinted HAZ elements on bottom layer.
- realization_bottom_layer
- Link indices for seam, area connectors realization bottom layer.
- realization_bottom_projection_elems
- Projection elements on bottom layer.
- realization_bottom_projection_positions
- Projection positions on bottom layer.
- realization_bottom_weld_elems
- Weld elements connecting bottom layer.
- realization_bottom_weld_nodes
- Weld nodes connecting bottom layer.
- realization_haz_elems
- All imprinted HAZ elements.
- realization_links_haz_elems
- Imprinted HAZ elements on links.
- realization_links_projection_elem
- Projection element on links.
- realization_links_projection_position
- Projection position on links.
- realization_links_weld_elems
- Weld elements (head and body) connecting links.
- realization_links_weld_nodes
- Weld nodes connecting links.
- realization_links_weld_nodes
- Weld nodes connecting links.
- realization_ordered_links
- Link indices ordered by projection during realization for spot, bolt connectors.
- realization_top_haz_elems
- Imprinted HAZ elements on top layer.
- realization_top_layer
- Link indices for seam, area connectors realization top layer.
- realization_top_projection_elems
- Projection elements on top layer.
- realization_top_projection_positions
- Projection positions on top layer.
- realization_top_weld_elems
- Weld elements connecting top layer.
- realization_top_weld_nodes
- Weld nodes connecting top layer.
- realization_weld_elems
- All FE including weld body and head.
- solver_id
- The solver ID of the entity.
- solverkeyword
- The name of the solver keyword.
- solvername
- The solver name of the entity for entities enabled for name pool, otherwise the internal name of the entity.
Version History
2020.1 - Added new data name solverkeyword.
2021.1 - Added new data names moduleid, poolid, poolname, and solver_id.
2021.2 - Added new data names internalname and solvername.
2025.1 - Added new data names ce_acm_option_1, ce_appliedmass, ce_appliedmassdis, ce_area_maint_gaps , ce_areaconstthickness, ce_areastacksize, ce_bodylen, ce_boltmaxdiameter, ce_boltmindiameter, ce_boltthread, ce_configname, ce_connectivity, ce_connectivity_adjust, ce_connectivity_adjust_realization, ce_coords, ce_density, ce_dia_factor, ce_diameter, ce_dir_assign, ce_endoffset_option, ce_facearea, ce_fe_vector, ce_fesolver, ce_ijk, ce_l1, ce_l1d1, ce_l2, ce_l2d2, ce_layers, ce_linelength, ce_link_number, ce_ltb_angled_direction, ce_nonnormal, ce_propertyid, ce_rbe3_center_option, ce_realents, ce_spacing, ce_state, ce_style, ce_systems, ce_tolerance, ce_usercontrol, dataname=ce_dircords, realization_bottom_haz_elems, realization_bottom_layer, realization_bottom_projection_elems, realization_bottom_projection_positions, realization_bottom_weld_elems, realization_bottom_weld_nodes, realization_haz_elems, realization_links_haz_elems, realization_links_projection_elem, realization_links_projection_position, realization_links_weld_elems, realization_links_weld_nodes, realization_ordered_links, realization_top_haz_elems, realization_top_layer, realization_top_projection_elems, realization_top_projection_positions, realization_top_weld_elems, realization_top_weld_nodes, and realization_weld_elems.