Home
Model Setup - Dispensing Ribbon
Set up your part, nozzles, materials, tooling and process parameters prior to analysis.
Nozzle
Use the Nozzle icon to define a path or stationary set of injection points for the nozzle to release the foaming material into the mold.

Welcome
What's New
Discover new features and enhancements.
Get Started
New to Inspire PolyFoam? Learn the basics here.
Tutorials
Start using Inspire PolyFoam with our interactive tutorials.
Parametric Modeling
Create 2D sketches, surfaces, and solids with construction history and variables.
Model Setup - Foaming Ribbon
Set up your foam part, nozzles, materials, tooling and process parameters prior to analysis.
Model Setup - Dispensing Ribbon
Set up your part, nozzles, materials, tooling and process parameters prior to analysis.
- Fluid Part
  Use the Fluid Part tools to designate or create the fluid parts in your model geometry.
- Nozzle
  Use the Nozzle icon to define a path or stationary set of injection points for the nozzle to release the foaming material into the mold.
  - Add/Edit Nozzles
    Add or edit a nozzle system that includes travel paths or stationary points for releasing the material into the mold, nozzle size, injection direction, mass flow rate, and material-flow start and end times.
  - Import Nozzles
    Import nozzle data from an existing .csv or .txt file.
  - Designate Prefill Parts
    Designate a model part as pre-dispensed adhesive. Define the part's material type and initial temperature.
- Materials
  Review, create, import, export, modify and assign materials through the Materials dialog.
- Tooling
  Use the tools in the Tooling sub-ribbon to designate housing components, designate inserts, and create vents.
- Moving Parts
  Designate housing parts on the model as moving parts.
PolyFoam Analysis
Run an analysis to minimize defects and prevent manufacturing problems for a foam part design.
Dispensing Analysis
Run an analysis to minimize defects and prevent manufacturing problems for a fluid part design.
Frequently Asked Questions
Got questions? We have answers!

Nozzle

Use the Nozzle icon to define a path or stationary set of injection points for the nozzle to release the foaming material into the mold.

Location: Dispensing ribbon, Nozzle icon.